Direction of Using Screw Valve Suction Cupping Set

1.  Clean thoroughly, remove body hair.
2.  Wash cups and target areas on skin with warm, lightly salty water, and dry before cupping.
3. Before performing cupping procedure with a suction cup, make sure the inside of the cup is clean and the assembly is intact (valve and seal are firmly fastened to cup).
4.  Select an appropriate size or type of cup. (Smaller cups are for smaller body areas).
5. Smear an appropriate amount of oil, or skin cream onto the target area.
6.  Put the suction cup on the area and turn the knob clockwise until desired pressure is reached. The cup should have enough pressure to stay on the body and pull up the skin. The cups can be used individually or in combination according to your preference.
7.  After the desired elapsed time, turn the knob counterclockwise to release the pressure. Always use this method to release cup gently (rather than wrenching it away suddenly) to prevent skin damage.
8.  It is normal for darkening to appear on the skin where cups are applied. This will dissipate in a few days.
9. It is possible that sometimes blisters may appear on the skin where the cup has been attached. When the blistering is serious, routine sterilization is necessary. Prick the blisters and apply disinfectant.
10. During each cupping session, keep the room warm.
11. Use for no more than 15 minutes / target area, 1~2